https://www.displayfusion.com/Discussions/RSS/?All=1 Binary Fortress Discussions RSS Mon, 24 Aug 2026 18:56:45 GMT en hourly 1 https://www.displayfusion.com/Discussions/RSS/?All=1 https://www.displayfusion.com/Discussions/View/display-fusion-not-opening-or-loading/?ID=01a02734-04cb-760a-8174-e1d7db0ec5a1#2 Mon, 24 Aug 2026 18:55:14 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/display-fusion-not-opening-or-loading/?ID=01a02734-04cb-760a-8174-e1d7db0ec5a1#2 DisplayFusion I'm sorry to hear you're having this issue! Can you see anything in Event Viewer \ Applications about DisplayFusion crashing or any other errors related to it? ]]> https://www.displayfusion.com/Discussions/View/first-time-function-activation-delay/?ID=01a032aa-0250-720a-9ef2-8f396bec8b2f Mon, 24 Aug 2026 07:26:38 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/first-time-function-activation-delay/?ID=01a032aa-0250-720a-9ef2-8f396bec8b2f DisplayFusion After upgrading from an older DisplayFusion version (9.x or 10.x not really sure) to 12.1.1, scripted-function hotkeys have approximately a 2-second delay on the first activation. Subsequent usages are immediately.

The delay doesn't happen every single time, but is particularly noticeable after DisplayFusion has been idle/restarted.

The script is a simple application mute while focused function (even from the script section on this website):
BFS.Application.GetAppIDByWindow() followed by BFS.Audio.GetApplicationMute() and BFS.Audio.SetApplicationMute().

I also tested disabling "New Assembly Resolver" in advanced settings, but this does not change the behavior.

Windows 10
Displayfusion 12.1.1 ]]> https://www.displayfusion.com/Discussions/View/?ID=01a0311a-5745-75b9-a86d-cb26c53a1117 Mon, 24 Aug 2026 00:10:05 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/?ID=01a0311a-5745-75b9-a86d-cb26c53a1117 DisplayFusion 任务栏不能显示秒钟，建议加上此功能 ]]> https://www.displayfusion.com/Discussions/View/problem-with-loading-wallpaper-from-vladstudio/?ID=01a009e4-3a67-736c-ab03-df4113194fbe#3 Sun, 23 Aug 2026 23:13:30 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/problem-with-loading-wallpaper-from-vladstudio/?ID=01a009e4-3a67-736c-ab03-df4113194fbe#3 DisplayFusion We talked to Vlad and the Vladstudio integration in DisplayFusion should be up and running again. Thanks for your patience! ]]> https://www.displayfusion.com/Discussions/View/duplicate-desktop-icons-on-to-the-second-monitor-2026/?ID=01a02d72-f17c-761e-b99f-f154f44b5346 Sun, 23 Aug 2026 07:08:23 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/duplicate-desktop-icons-on-to-the-second-monitor-2026/?ID=01a02d72-f17c-761e-b99f-f154f44b5346 DisplayFusion Hi,

Is it possible to easily duplicate/replicate/mirror the desktop icons from my primary monitor to the second monitor?

And if possible in such a way that any future changes made to the primary desktop are automatically reflected on the secondary.

Example:

I click an application open on my prio 1 - monitor, on the second screen I dont get a app. icon visable in the taskbar. Only when I move the application window to the second screen.

Thanks and regards, ]]> https://www.displayfusion.com/Discussions/View/displayfusion-taskbars-change-the-monitor-work-area-without-notifying-other-apps/?ID=01a02ac5-ad3c-701a-8629-a7084d487f51 Sat, 22 Aug 2026 18:39:53 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displayfusion-taskbars-change-the-monitor-work-area-without-notifying-other-apps/?ID=01a02ac5-ad3c-701a-8629-a7084d487f51 DisplayFusion Hello,

I have been running DisplayFusion for many years now, and it is still one of the first
things I install on any new machine. It has quietly solved multi-monitor problems for me
across more versions of Windows than I can count, and it remains one of my favorite pieces
of software. I am sending this one in because I would like it to stay that good, not
because I am unhappy with it.

I have a reproducible issue on DisplayFusion 12.1.1.0 (Windows 11 24H2, build 26100) where
applications that cache monitor work areas at startup end up with stale values on the
monitors that have DisplayFusion taskbars.

Setup: three monitors, all at 100% scaling. Windows taskbar on the primary, moved to the
top by Start11. DisplayFusion taskbars on the two secondary monitors, also at the top,
48px tall. "Show taskbar on all displays" is off in Windows, so DisplayFusion supplies both
secondary taskbars.

DisplayFusion reserves the work area correctly. GetMonitorInfo reports rcWork.top = 48 on
all three monitors. The problem is timing plus notification. DisplayFusion.exe launches
from the HKCU Run key and starts roughly 28 seconds after Explorer on my machine. Anything
that reads work areas before that point gets the full monitor rect and is apparently never
told to re-read.

In my case that is PowerToys FancyZones 0.100.2, which starts about 24 seconds before
DisplayFusion and snapshots work areas at startup. Its zone grid on both DisplayFusion
monitors ends up anchored 48px too high, so any window snapped to a top zone lands
underneath the taskbar until it is manually resized.

Measured live, with FancyZones still running:
Monitor OS work area (GetMonitorInfo) FancyZones cached
DISPLAY1 (0,4-(3840,2160) (0,4-(3840,2160) correct, no DF taskbar
DISPLAY2 (-1080,4-(0,1920) (-1080,0)-(0,1920) 48px too high
DISPLAY3 (3840,4-(7680,2160) (3840,0)-(7680,2160) 48px too high
I read the FancyZones column by calling GetWindowRect on its FancyZones_ZonesOverlay
windows, since it sizes one per work area, so those rects are effectively its cache. That
should let you reproduce the measurement without taking my word for it.

FancyZones logged no work-area or display-change event at any point after its startup
snapshot, even though DisplayFusion applied the reservation about 22 seconds later.
Broadcasting WM_SETTINGCHANGE with wParam = SPI_SETWORKAREA to HWND_BROADCAST fixes it
immediately. FancyZones logs "WorkArea size changed" and rebuilds all three work areas
correctly. A genuine display change (resolution change, or monitor sleep and wake) also
fixes it, which is consistent with the reservation itself being right and only the
notification being absent.

This does not look specific to FancyZones. Any application that reads work areas once at
startup would be affected the same way, and DisplayFusion's launch timing makes that a
fairly likely race. I realize suppressing the broadcast may well be deliberate, since
firing it during startup could cause other apps to rearrange windows, so I understand if
the timing is more delicate than it looks from the outside.

Would it be possible for DisplayFusion to broadcast WM_SETTINGCHANGE with SPI_SETWORKAREA
(or call SystemParametersInfo with SPIF_SENDCHANGE) once it has finished applying its
taskbar work area reservations?

Happy to test a build or gather more detail if that would help.

Thanks for building something this good and for keeping it that way as long as you have. ]]> https://www.displayfusion.com/Discussions/View/letras-diferentes/?ID=01a028b4-42df-778a-8d2d-47df823d1462 Sat, 22 Aug 2026 09:01:37 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/letras-diferentes/?ID=01a028b4-42df-778a-8d2d-47df823d1462 DisplayFusion I first tried Letras Diferentes when I wanted to give some of my everyday online text a more distinctive appearance. I was not looking for complicated design software; I simply wanted something that would let me experiment with different lettering styles quickly. After using it for a while, I found the experience surprisingly enjoyable.

What I appreciate most is the creative freedom. Instead of settling for the standard appearance of my text, I can explore various designs and see which one fits my content best. I have used the generated styles for short captions, profile descriptions, usernames, and casual messages. It is a small change, but it can make familiar text feel much more interesting.

I also like discovering Fontes Diferentes
and comparing how the same phrase looks in different styles. Sometimes I prefer something simple and elegant, while other times a more decorative style works better. Being able to experiment before choosing a final version makes the whole process feel effortless.

Another positive point is that the experience does not feel complicated. I can create the text I want, choose a design, and copy the result without spending much time on it. This is particularly useful when I am preparing content and want to add a little personality without interrupting my workflow.

Overall, my experience with Letras Diferentes has been positive. It has become a convenient little tool whenever I want to make ordinary text feel more personal, creative, and visually interesting. ]]> https://www.displayfusion.com/Discussions/View/display-fusion-not-opening-or-loading/?ID=01a02734-04cb-760a-8174-e1d7db0ec5a1 Sat, 22 Aug 2026 02:01:56 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/display-fusion-not-opening-or-loading/?ID=01a02734-04cb-760a-8174-e1d7db0ec5a1 DisplayFusion Hi,

I have recently got a new PC and have downloaded the newest version of DisplayFusion (Bought premium on Old PC) and after download i cannot seem to open the app. Every time i launch it nothing happens.
Could you please help.

Thankyou ]]> https://www.clipboardfusion.com/Discussions/View/clipboard-syncing-delay/?ID=019aa236-6671-75f7-a636-a5f9461d62cf#20 Fri, 21 Aug 2026 23:58:41 GMT Binary Fortress Software https://www.clipboardfusion.com/Discussions/View/clipboard-syncing-delay/?ID=019aa236-6671-75f7-a636-a5f9461d62cf#20 ClipboardFusion I was able to reproduce it on my very first try. I launched ClipboardFusion, enabled logging, and copied something to the clipboard at 4:45 pm on 8/21/2026. It immediately appeared in the local history tab in the app, but I waited for two minutes and it never appeared in the Online Recent tab (on the same computer). I viewed my history online at https://www.clipboardfusion.com/Online/ just to make sure it was copied (it did correctly appear on the website).

After two minutes, I copied something else to the clipboard at 4:47 pm and it immediately appeared in the Online Recent list (on the same computer), but the initial item still has not appeared in the list after 10 minutes. I've attached my logs. (And yes, my search/filter bar in the app is blank.) ]]> https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#12 Fri, 21 Aug 2026 18:46:25 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#12 DisplayFusion Could you send over a new debug log? It should have some timing information in it for us to look at, but the last log didn't have any.

• On the DisplayFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal" and then click "Clear Log"
• Try loading the Window Position Profile using the DisplayFusion tray menu, note the time so we'll know where to check in the log file
• Click the "Export Info to File" button on the Settings > Troubleshooting tab
• Reply with the file attached
• Disable debug logging after sending the log

Thanks! ]]> https://www.clipboardfusion.com/Discussions/View/clipboard-syncing-delay/?ID=019aa236-6671-75f7-a636-a5f9461d62cf#19 Fri, 21 Aug 2026 16:20:21 GMT Binary Fortress Software https://www.clipboardfusion.com/Discussions/View/clipboard-syncing-delay/?ID=019aa236-6671-75f7-a636-a5f9461d62cf#19 ClipboardFusion I haven't been able to reproduce the issue of the Online Recent tab not updating here. Could you enable debug logging and send us a copy of the log next time it happens?

• On the ClipboardFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal"
• The next time the Online Recent tab stops working, note the time so we'll know where to check in the log file
• Click the "Export Info to File" button on the Settings > Troubleshooting tab
• Reply with the file attached
• Disable debug logging after sending the log

Also just double-check that there isn't any text (or spaces) in the filter box at the bottom of the Clipboard Manager when this happens, just to be sure it's not just the filter preventing items from showing. ]]> https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#11 Fri, 21 Aug 2026 11:36:15 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#11 DisplayFusion yes ]]> https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1#3 Fri, 21 Aug 2026 11:23:53 GMT Binary Fortress Software https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1#3 CheckCentral Thsts great thank you very much. ]]> https://www.displayfusion.com/Discussions/View/shift-right-click-run-as-a-different-user-pinned-dp-taskbar-icons/?ID=01a015fc-a73e-732d-afa5-fe066f1f58db#2 Thu, 20 Aug 2026 21:31:17 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/shift-right-click-run-as-a-different-user-pinned-dp-taskbar-icons/?ID=01a015fc-a73e-732d-afa5-fe066f1f58db#2 DisplayFusion I've added your info to an open request for a "Run as different user" option on the DisplayFusion taskbar shortcuts.

Meantime, I'm surprised the workaround doesn't work. Does it work if you try it with something other than the AD MMC, like just having it run mspaint.exe or something like that? ]]> https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#4 Thu, 20 Aug 2026 21:27:23 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#4 DisplayFusion I can't seem to reproduce this issue here when I test. I get the same results on that page regardless of whether or not DisplayFusion is running.

Does it make any difference if you try a different keyboard? ]]> https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#3 Thu, 20 Aug 2026 21:12:42 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#3 DisplayFusion HyperX Alloy FPS ]]> https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#2 Thu, 20 Aug 2026 20:21:48 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791#2 DisplayFusion What keyboard make and model do you have? ]]> https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1#2 Thu, 20 Aug 2026 20:14:28 GMT Binary Fortress Software https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1#2 CheckCentral We have this open on our feature request list, so I've added your vote to it

Thanks! ]]> https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#10 Thu, 20 Aug 2026 20:09:33 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#10 DisplayFusion Haha that would be nice but that's a Windows thing. I do believe they've fixed up that issue in Windows 11 though.

When you load the Window Position Profile manually, does it still take 15-20 seconds before it moves the window? ]]> https://www.checkcentral.cc/Discussions/View/checkcentral-change-log/?ID=804c9247-e683-4101-9a2c-eb29c77dea8e#266 Thu, 20 Aug 2026 18:34:19 GMT Binary Fortress Software https://www.checkcentral.cc/Discussions/View/checkcentral-change-log/?ID=804c9247-e683-4101-9a2c-eb29c77dea8e#266 CheckCentral

• Resolved a push notification issue that would sometimes display the wrong date

]]> https://www.checkcentral.cc/Discussions/View/checkcentral-change-log/?ID=804c9247-e683-4101-9a2c-eb29c77dea8e#265 Thu, 20 Aug 2026 16:44:40 GMT Binary Fortress Software https://www.checkcentral.cc/Discussions/View/checkcentral-change-log/?ID=804c9247-e683-4101-9a2c-eb29c77dea8e#265 CheckCentral

• Added option to custom dashboards to display a highlight border showing the current overall status

]]> https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1 Thu, 20 Aug 2026 13:55:24 GMT Binary Fortress Software https://www.checkcentral.cc/Discussions/View/feature-request-scheduled-pause-automatic-resume-for-checks/?ID=01a01f74-7e44-724f-bc56-2d2d02878aa1 CheckCentral Feature Request: Scheduled Pause / Automatic Resume for Checks

Hi,

I'd like to request the ability to pause a CheckCentral check for a defined period, with it automatically resuming at a specified date and time.

A common example for us is monitoring workstation backups. If a customer goes on holiday for a week and their PC is switched off, the check will naturally become overdue even though there isn't actually a problem.

At the moment I can manually pause the check, which solves the false alert, but I then have to remember to manually resume it when the customer returns.

It would be really useful if the Pause option included something like:

Pause until:
[Date] [Time]

Reason:
Customer on holiday

The check would remain paused until that date/time and then automatically resume its normal monitoring schedule.

Ideally there could also be options such as:

- Pause indefinitely
- Pause until a specified date/time
- Resume manually

For MSPs managing a large number of checks, I think this would be particularly useful. The risk with manually pausing checks is that somebody forgets to resume one, potentially leaving an important backup unmonitored.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791 Thu, 20 Aug 2026 09:06:54 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/keyboard-input-lag-while-using-latest-displayfusion-pro-steam-version/?ID=01a01e6c-5de1-7320-9be3-ae67be805791 DisplayFusion With the recent updates i started experiencing some visible input delays while running display fusion (for taskbar function mostly), i honestly don't know which version did it, because i didn't update it for like a year.

With sites like https://www.iobit.com/en/keyboard-latency-test.php i managed to identify that problem is indeed DisplayFusion (while it runs, there are input spikes to 1/60ms from 120ms while pressing mashing buttons) which doesn't happen if i turn DisplayFusion off. These spikes feel very off while typing.

Can't downgrade version because i use Steam version.

Any help? Debug export attached ]]> https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#9 Thu, 20 Aug 2026 03:14:39 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displayfusion-window-position-profile-not-moving-windows-hotkey-loads-profile-but-no-effect/?ID=019ff96f-2798-7369-95b0-c4802c793b44#9 DisplayFusion Hi
No, and it has worked before.
Actually, it would be better anyway if the windows weren't all jumbled up after the screens were reactivated—then you wouldn't have to reload the profile every time. ]]> https://www.displayfusion.com/Discussions/View/displafusion-questions-about-triggers/?ID=01a01b6e-7d6c-7796-8acc-dabeeeb6a9d1#2 Thu, 20 Aug 2026 02:32:10 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/displafusion-questions-about-triggers/?ID=01a01b6e-7d6c-7796-8acc-dabeeeb6a9d1#2 DisplayFusion The first one isn't possible to do, sorry. The second one could maybe be possible if you write a scripted function to handle the closing of the one app and launching of the other app. Then you can have a "Monitor Profile Changed" trigger that runs the scripted function. ]]>